T: +86-182-2202-9592
E: yuantai@yuantai-steel.com
E: yuantai@yuantai-steel.com
No.1 Science and Technology Road, DaQiuZhuang Industrial Zone, Jinghai, Tianjin, China 301606
| Quantity: | |
|---|---|
The installation of flexible photovoltaic bracket sunsoar flexible Zn-Al-Mg requires the preparation of materials and tools, and the survey of the installation site. Determine the location and direction of the photovoltaic panel, lay and fix the flexible bracket, place the photovoltaic panel and connect the cables and connectors. Finally, conduct a system inspection to ensure that the installation is firm, the conductivity is good, and the system is operating normally. Follow safety regulations during the installation process, and it is recommended to be carried out under the guidance of professionals.
Before starting the installation, you need to ensure that all materials and tools are ready. These materials usually include flexible brackets, photovoltaic panels, connectors, cables, etc., while tools may include screwdrivers, wrenches, electric drills, etc. In addition, it is necessary to survey the installation site to ensure that the ground is flat, free of obstacles, and sunny.
This usually requires taking into account the angle and duration of sunlight exposure to ensure that the photovoltaic panel can receive sunlight to the greatest extent.
Lay the flexible bracket in the predetermined position and fix it to the ground with screws or other fixings. Make sure that the bracket is flat, stable, and can bear the weight of the photovoltaic panel.
This step requires attention to the installation angle of the photovoltaic panel and the way it is fixed to the bracket. Generally speaking, the photovoltaic panel should be tightly connected to the bracket to avoid shaking under wind or other external forces.
Connect the photovoltaic panel to the cable and use the connector to ensure that the connection is firm and the conductivity is good. During the connection process, attention should be paid to the length and direction of the cable to ensure the beauty and practicality of the entire system.
After ensuring that all components are installed, the entire system should be fully inspected. This includes checking whether the photovoltaic panel is firmly installed, whether the cable connection is good, and whether the system can operate normally. If any problems are found, they should be repaired and adjusted in time.
Foundation form | PHC/cast-in-place pile/cement foundation |
Material | Zn-Al-Mg steel |
Single span | ~ 20m |
Land utilization rate | ≥42% |
Slope adaptability | ≥45° |
Minimum height from ground | 0.5m |
Wind-resistant design | According to project requirements |
Module inclination | ≤35° |
Stranded wire strength | 1860MPa |
Module installation method | Single vertical installation |
Warranty | 25-30 years |
The installation of flexible photovoltaic bracket sunsoar flexible Zn-Al-Mg requires the preparation of materials and tools, and the survey of the installation site. Determine the location and direction of the photovoltaic panel, lay and fix the flexible bracket, place the photovoltaic panel and connect the cables and connectors. Finally, conduct a system inspection to ensure that the installation is firm, the conductivity is good, and the system is operating normally. Follow safety regulations during the installation process, and it is recommended to be carried out under the guidance of professionals.
Before starting the installation, you need to ensure that all materials and tools are ready. These materials usually include flexible brackets, photovoltaic panels, connectors, cables, etc., while tools may include screwdrivers, wrenches, electric drills, etc. In addition, it is necessary to survey the installation site to ensure that the ground is flat, free of obstacles, and sunny.
This usually requires taking into account the angle and duration of sunlight exposure to ensure that the photovoltaic panel can receive sunlight to the greatest extent.
Lay the flexible bracket in the predetermined position and fix it to the ground with screws or other fixings. Make sure that the bracket is flat, stable, and can bear the weight of the photovoltaic panel.
This step requires attention to the installation angle of the photovoltaic panel and the way it is fixed to the bracket. Generally speaking, the photovoltaic panel should be tightly connected to the bracket to avoid shaking under wind or other external forces.
Connect the photovoltaic panel to the cable and use the connector to ensure that the connection is firm and the conductivity is good. During the connection process, attention should be paid to the length and direction of the cable to ensure the beauty and practicality of the entire system.
After ensuring that all components are installed, the entire system should be fully inspected. This includes checking whether the photovoltaic panel is firmly installed, whether the cable connection is good, and whether the system can operate normally. If any problems are found, they should be repaired and adjusted in time.
Foundation form | PHC/cast-in-place pile/cement foundation |
Material | Zn-Al-Mg steel |
Single span | ~ 20m |
Land utilization rate | ≥42% |
Slope adaptability | ≥45° |
Minimum height from ground | 0.5m |
Wind-resistant design | According to project requirements |
Module inclination | ≤35° |
Stranded wire strength | 1860MPa |
Module installation method | Single vertical installation |
Warranty | 25-30 years |
