T: +86-182-2202-9592
E: yuantai@yuantai-steel.com
E: yuantai@yuantai-steel.com
No.1 Science and Technology Road, DaQiuZhuang Industrial Zone, Jinghai, Tianjin, China 301606
| Quantity: | |
|---|---|
Zinc-aluminum-magnesium steel tube products are mainly used in greenhouse construction, oil and gas pipelines, industrial and civil water supply, gas supply, heating supply, oil supply, building hardware and other fields. Zinc-aluminum-magnesium steel tubes have better corrosion resistance, which can be several to more than ten times better than galvanized sheets within a certain range. It has a low friction coefficient and stable friction characteristics, which is very beneficial to stamping. It can reduce the wear of the coating, thereby reducing the prying defects of parts.
Zinc-aluminum-magnesium square tubes are usually welded using TIG (tungsten inert gas) welding method. This method uses argon gas for protection to avoid oxidation at high temperatures, thereby maintaining the quality and strength of the weld. The following points should be noted during welding:
Before welding, the welding surface should be cleaned to ensure that it is free of rust, pollutants and other impurities.
Control the welding temperature to avoid material melting or deformation caused by excessive temperature.
Use appropriate welding materials, commonly aluminum-on-aluminum wire.
When welding, take appropriate safety measures and protect yourself with the appropriate protective equipment.
The differences are mainly reflected in the following aspects:
Zinc-aluminum-magnesium square tube is treated with a layer of zinc-aluminum-magnesium alloy on the surface of the steel pipe to play an anti-corrosion role, while hot-dip galvanized pipe is immersed in molten zinc for galvanizing.
Compared with traditional zinc coatings, zinc-aluminum-magnesium alloy coatings have better corrosion resistance and wear resistance, providing longer service life. Hot-dip galvanized tube has relatively poor corrosion resistance and wear resistance due to its pure zinc layer.
Zinc-aluminum-magnesium square tube adopts electroplating galvanizing process, while hot-dip galvanized tube adopts hot-dip galvanizing process.
Generally, zinc-aluminum-magnesium square tubes are slightly more expensive than hot-dip galvanized tubes. Because zinc-aluminum-magnesium alloys have better properties, their prices are higher.
Compared with hot-dip galvanized tubes, zinc-aluminum-magnesium tubes have better corrosion resistance and wear resistance, but are more expensive. The choice of which type of pipe to use should be based on specific environmental conditions and requirements.
Outer Diameter | 20*20-100*200mm |
Thickness | 0.6-3.0mm |
Length | 0.5-24M |
Product material | ZM30/S235,ZM275/S350 |
Coating weight | ZM20~ZM400 |
MOQ | 2-5 Tons |
Payment method | TT/LC |
Delivery time | 7-35 days |
Capacity | 3 million tons/year |
Port of shipment | Tianjin Xingang Port |
Zinc-aluminum-magnesium steel tube products are mainly used in greenhouse construction, oil and gas pipelines, industrial and civil water supply, gas supply, heating supply, oil supply, building hardware and other fields. Zinc-aluminum-magnesium steel tubes have better corrosion resistance, which can be several to more than ten times better than galvanized sheets within a certain range. It has a low friction coefficient and stable friction characteristics, which is very beneficial to stamping. It can reduce the wear of the coating, thereby reducing the prying defects of parts.
Zinc-aluminum-magnesium square tubes are usually welded using TIG (tungsten inert gas) welding method. This method uses argon gas for protection to avoid oxidation at high temperatures, thereby maintaining the quality and strength of the weld. The following points should be noted during welding:
Before welding, the welding surface should be cleaned to ensure that it is free of rust, pollutants and other impurities.
Control the welding temperature to avoid material melting or deformation caused by excessive temperature.
Use appropriate welding materials, commonly aluminum-on-aluminum wire.
When welding, take appropriate safety measures and protect yourself with the appropriate protective equipment.
The differences are mainly reflected in the following aspects:
Zinc-aluminum-magnesium square tube is treated with a layer of zinc-aluminum-magnesium alloy on the surface of the steel pipe to play an anti-corrosion role, while hot-dip galvanized pipe is immersed in molten zinc for galvanizing.
Compared with traditional zinc coatings, zinc-aluminum-magnesium alloy coatings have better corrosion resistance and wear resistance, providing longer service life. Hot-dip galvanized tube has relatively poor corrosion resistance and wear resistance due to its pure zinc layer.
Zinc-aluminum-magnesium square tube adopts electroplating galvanizing process, while hot-dip galvanized tube adopts hot-dip galvanizing process.
Generally, zinc-aluminum-magnesium square tubes are slightly more expensive than hot-dip galvanized tubes. Because zinc-aluminum-magnesium alloys have better properties, their prices are higher.
Compared with hot-dip galvanized tubes, zinc-aluminum-magnesium tubes have better corrosion resistance and wear resistance, but are more expensive. The choice of which type of pipe to use should be based on specific environmental conditions and requirements.
Outer Diameter | 20*20-100*200mm |
Thickness | 0.6-3.0mm |
Length | 0.5-24M |
Product material | ZM30/S235,ZM275/S350 |
Coating weight | ZM20~ZM400 |
MOQ | 2-5 Tons |
Payment method | TT/LC |
Delivery time | 7-35 days |
Capacity | 3 million tons/year |
Port of shipment | Tianjin Xingang Port |
