Let You Know about The Export Packaging of Prepainted Zn-Al-Mg Steel Coil
Home » Blogs » Company News » Let You Know about The Export Packaging of Prepainted Zn-Al-Mg Steel Coil

Let You Know about The Export Packaging of Prepainted Zn-Al-Mg Steel Coil

Views: 107     Author: Site Editor     Publish Time: 2024-07-23      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
sharethis sharing button

Prepainted Zn-Al-Mg steel coil is a high-end building material, widely used in building decoration, furniture manufacturing, transportation and other industries. Its beautiful appearance, corrosion resistance, easy processing, environmental protection and other characteristics are favored by the majority of users. However, due to the large size and heavy weight of color-coated boards, reasonable packaging measures must be taken during the export process to ensure its safe transportation and damage-free arrival at the destination. This article will introduce the relevant content of color-coated board export packaging in detail from the aspects of packaging materials, packaging process, export requirements, etc.


Let You Know about The Export Packaging of Prepainted Zn-Al-Mg Steel Coil


1. Packaging materials

(1)Wooden pallets

Wooden pallets are a common packaging material with the advantages of strong load-bearing capacity, good shock resistance, light weight, easy processing and relatively low price. In the export packaging of prepainted Zn-Al-Mg steel coil, wooden pallets can be used to support prepainted Zn-Al-Mg steel coil to prevent them from being squeezed, falling and other effects. The materials used to make wooden pallets should be high-strength wood, such as cedar, pine, etc., and should also have anti-corrosion and insect-proof characteristics to extend their service life.

(2)Hollow board

Hollow board is a lightweight and high-strength packaging material, usually made of paper or foam material, with the advantages of light weight, good shock absorption, easy processing, and low price. In the export packaging of prepainted Zn-Al-Mg steel coil, hollow boards can be used to wrap color-coated boards to protect their surfaces from scratches, collisions, etc. Hollow boards should be made of high-quality raw materials, and should also have the characteristics of compression resistance and waterproofness to ensure that they are not easily damaged during the packaging process.

(3) Stretch film

Stretch film is a plastic film used for packaging items, with the characteristics of high transparency, good tensile strength, and wear resistance. In the export packaging of color-coated boards, stretch film can be used to firmly fix wooden pallets and color-coated boards together to prevent them from moving or sliding during transportation. Stretch film should be made of high-quality raw materials, and should also have the characteristics of anti-static and anti-ultraviolet to ensure that color-coated boards are not affected by static electricity, ultraviolet rays, etc. during the packaging process.

2. Packaging process

(1)Color-coated board inspection

Before the color-coated board is exported and packaged, it is necessary to first inspect the color-coated board to ensure that there are no obvious scratches, collisions, etc. on its surface. At the same time, it is also necessary to check whether the size and weight of the color-coated board meet the export requirements.

(2)Wooden pallet assembly

Cut the wood according to the specified size and shape, and assemble it into a wooden pallet with nails. During the assembly process, the stability and load-bearing capacity of the wooden pallet should be ensured.

(3)Hollow board wrapping

Lay a layer of hollow board on the wooden pallet and place the color-coated board on the hollow board. Then wrap the hollow board around the color-coated board and fix it to the wooden pallet with tape or wrapping film.

(4) Wrapping film packaging

Wrap the wrapping film from the bottom to the top of the color-coated board and cut the wrapping film with scissors. During the wrapping process, ensure that the tension of the wrapping film is uniform and tight to prevent the color-coated board from moving or sliding during transportation.

(5) Label attachment

After the color-coated board is packaged for export, a label should be attached to the package to indicate the name, specification, quantity and other information of the color-coated board. At the same time, the export country, destination port, mode of transportation and other information should also be indicated on the label to facilitate the verification and management of relevant departments such as customs and logistics companies.

3. Export requirements

(1)Export contract

Before the color-coated board is exported, the two parties should sign an export contract to clarify the variety, specification, quantity, price, delivery period, mode of transportation and other contents of the color-coated board. The export contract is an important basis for the export of color-coated boards, and both parties should perform their respective obligations in accordance with the provisions of the contract.

(2)Customs declaration procedures

Before the color-coated board is exported, customs declaration procedures need to be carried out, including providing relevant documents such as a list of goods, a certificate of origin, a quality inspection certificate, and an export license, so that the customs can check and verify. At the same time, the corresponding export tariffs, value-added tax and other taxes and fees must be paid.

(3)Transportation methods

The main transportation methods for the export of color-coated boards are sea transportation, air transportation, and land transportation. The specific mode of transportation should be selected according to the number of color-coated plates, destination, transportation time and other factors. When choosing a mode of transportation, you should also pay attention to the relevant laws, regulations and requirements of the exporting country and the destination country of the color-coated plates, as well as the qualifications and service level of the logistics company.

(4) Packaging requirements

The export packaging of color-coated plates should comply with the packaging requirements and standards of the exporting country and the destination country to ensure the safety and integrity of the goods during transportation. At the same time, you should also pay attention to the special properties and requirements of color-coated plates, and choose appropriate packaging materials and packaging methods to prevent the color-coated plates from being squeezed, vibrated, and friction.

(5)Quality inspection

Quality inspection should be carried out before the color-coated plates are exported to ensure that the quality of the color-coated plates meets the relevant standards and requirements of the exporting country and the destination country. Quality inspection includes testing and evaluation of appearance quality, mechanical properties, corrosion resistance, weather resistance, etc. The quality inspection report is one of the important certification materials for the export of color-coated plates, and must be submitted to the customs and relevant departments of the destination country together with the goods.

4. Packaging precautions

(1)Selection of packaging materials

The export packaging materials of color-coated plates should be selected with certain strength and toughness, such as wood, hollow boards, and wrapping films. At the same time, attention should also be paid to the environmental friendliness and recyclability of the materials to avoid adverse effects on the environment.

(2)Packaging method

The export packaging method of color-coated boards should be selected according to the characteristics of the goods and the mode of transportation to avoid damage and loss of goods during transportation. During the packaging process, attention should be paid to the use and fixation of materials to ensure the safety and integrity of the color-coated boards.

(3)Label attachment

After the color-coated boards are packaged for export, labels should be attached in time, and the name, specifications, quantity and other information of the color-coated boards should be indicated. At the same time, the export country, destination port, mode of transportation and other information should also be indicated on the label to facilitate the verification and management of relevant departments such as customs and logistics companies.

(4) Quality inspection

Quality inspection should be carried out before the color-coated boards are exported to ensure that the quality of the color-coated boards meets the relevant standards and requirements of the exporting country and the destination country. The quality inspection report is one of the important certification materials for the export of color-coated boards, and must be submitted to the customs and relevant departments of the destination country together with the goods.

5. Summary

The export packaging of color-coated boards is an important link in the export of color-coated boards, which is directly related to the safety and integrity of the goods. During the packaging process, attention should be paid to the selection of packaging materials and methods, and the relevant laws, regulations and requirements of the exporting country and the destination country should be observed to ensure the smooth export of color-coated plates. At the same time, attention should also be paid to details such as quality inspection and labeling to improve the quality and competitiveness of exported goods.

When choosing a logistics company, attention should be paid to its qualifications and service level to ensure that the goods are safely and reliably protected during transportation. The logistics company should have a professional team and facilities, and be able to provide all-round, efficient and fast logistics services to provide strong support for the export of color-coated plates.


+86-182-2202-9592
No.1 Science and Technology Road, DaQiuZhuang Industrial Zone, Jinghai, Tianjin, China 301606

About Us

It is located in Daqiuzhuang, Tianjin, China's largest steel pipe production base, covering an area of 1,450 acres and with a net asset of 2.3 billion.

Quick Links

Product Category

Contact Us
Copyright ©️ 2024 Tianjin Yuantai Derun Steel Pipe Manufacturing Group Co., Ltd. All Rights Reserved. Sitemap. Support by leadong.com. Privacy Policy.